Peppermint | Linux OS Community Forum
 
It is currently Thu Sep 20, 2018 4:12 pm

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: ether channel between switch and server
PostPosted: Tue Mar 11, 2014 11:52 pm 
Offline

Joined: Tue Dec 31, 2013 12:26 am
Posts: 7
I am trying to configure ether channel between a cisco ws-c2960s-24ts-l switch and a linux server. I found out that i needed to use lacp as it supports interoperability between different types of hosts. i followed cisco's guide for forming ether channel. However when i do the configuration the ethernet goes down and the device becomes unpingable.

On the Linux side, the configuration looks like this:

Code:
cat /etc/modprobe.d/bond.conf
alias bond0 bonding 

cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
ONBOOT=yes
USERCTL=no
BOOTPROTO=none
NM_CONTROLLED="no"
IPADDR=10.76.161.135
PREFIX=21
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System bond0"
BONDING_OPTS="mode=4 miimon=100 lacp_rate=1"

cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no

cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE="eth1"
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no


Top
 Profile  
 
 

 Post subject: Re: ether channel between switch and server
PostPosted: Wed Mar 12, 2014 7:47 am 
Offline
User avatar

Joined: Tue Apr 17, 2012 12:25 pm
Posts: 5521
Location: Cornwall, England
Can you link to the "cisco's guide for forming ether channel" that you followed ?

_________________
Please be sure to sign up to the new Peppermint forum and post any new question there .. this forum will be made read-only on the 1st April 2014

You can read the announcement here:
http://peppermintos.net/viewtopic.php?f=6&t=6608
Or here's a direct link to the new forum:
http://forum.peppermintos.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  

Powered by php B.B. © 2000, 2002, 2005, 2007 php B.B. Group
Template made by DEVPPL